Small Backplate

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

So I see weebing out there at 6000, 12,000 lbs and higher. Would you think the 6000 lbs be to stiff and uncomfortable for diving?

Make sure to check on the thickness as the thicker webbing, probably those 6000/12000lb test strengths will probably be too thick to thread properly. Comfort won't be a problem, but you may not be able to thread it properly.
 
I bought one for a friend, we were supposed to leave for Curaçao tomorrow, I’m sad :(

It is a very nice plate.

Got the wife one and a VDH 18# wing for our trip May/June... It too is not happening...
 
Was going to get hers electroplated tree-frog-green...

That too is on hold.
 
https://www.shearwater.com/products/perdix-ai/

Back
Top Bottom