Closed Fred T Xlong plate - Stainless .188 thickness - REDUCED!!!
- Thread starter Tank601
- Start date
Sold or no longer available
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
OP
Tank601
Contributor
I also throw in a used DIR harness.
How long is the plate from the middle lower mounting hole to the bottom of the plate? IOW how much longer is the plate than a normal plate?
Michael
Michael
Nice!
runsongas
Contributor
17 9/16" is approximately 44.6 cm, about 2 inches or 5 cm longer than standard.
OP
Tank601
Contributor
If I understand you middle hole is 4 1/2 in from bottom
OP
Tank601
Contributor
No 4 1/4
OP
Tank601
Contributor
Figured this would go quick. Not many long plates out there
OP
Tank601
Contributor
I’ll throw in pair of tank straps too
Similar threads
