VDH WING ON DSS PLATE

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Thanks rob.mwpropane. Pics would be great if you get the chance. Thanks again.
 
Thanks rob.mwpropane. Pics would be great if you get the chance. Thanks again.

Here you go.
Dropbox - Backplate Wing - Simplify your life

The upper band is slightly tight as seen in the pictures as in not in the middle of the slot. Just closer to one side. The screw hole in the webbing was not used and is off center about an inch. It didn't line up with anything. This bothered me a little at first (just OCD) but it has no effect on anything. The "grommets" built into the plate are tough as it is to slip the webbing through, no chance of it moving.

Ask me anything.
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom