Aftermarket Filter tower for compressor!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Hi
Try MDE Midland diving they are in england.
They do a full range of filter and housings.Pmv & S/Valves
For your small compressor either a series 45 or better series 50 will do.
Watch out for the fittings as they are either 1/4 bsp or 1/4 bspt
they will sort out the fittings for your 6mm pipe from compressor block.

As for the fitting from the pmv to your charging hose a adaptor will be required.
You can get this from any hydraulic company.
 
i have allready send email to midland! Right now i don't have time to deal with it. I will do after summer time!
 
Question
So your compressor was built in Greece by PARAMINA
You live in Greece
So it must be easy to get a up grade housing direct from them.
Also if you ever want spare parts the you can get direct from Paramina
 
Question
So your compressor was built in Greece by PARAMINA
You live in Greece
So it must be easy to get a up grade housing direct from them.
Also if you ever want spare parts the you can get direct from Paramina
I have already contact the company! I am looking for alternative solutions
 
Shelden Sporting Goods Inc. - High Pressure Air Compressors

(edit- oops, didn't see EU requirement... best to keep the link here in case someone else might be looking)
Thanks for posting that link. It's a handy place to know about.
...just one silly question. They are selling a filter system that they say produces "Grade E quality air". Does anyone know what Grade E is? Is that breathing grade? Something else?
 
@PBcatfish

Limits for E:

CO2: <+1000 ppm
CO: <=10 ppm
*THC (methane): <=25 ppm (this is the only parameter different)
H20/Dew Point: <=67 ppm / <= -50f
Oil/Particles: <=5 mg/m^3
Odor: none

*THC not checked for in D

Oxygen %:

D: 19.5 to 23.5
E: 20 to 22
 
https://www.shearwater.com/products/peregrine/

Back
Top Bottom