Apeks FST first stage drysuit hose routing.

[wunat]

Hi,

I have posted this in the regulator section and thoughtI check it with the group member here.

I just bought an Apeks XTX200 from a friend and is thinking about rigging it for my single tank diving. I have a questions with regards to the hose routings for the inflator hoses. Do I route it to LP port 1 or LP port 2? (picture attached)

I was using a DST first stage (with 5th port) where the ports are more angled. I use to route the drysuit inflator hose to port number 1 and wing inflator hose to port number 2. When rigged, the wing inflator hose will run over the drysuit hose.

Do I do the same for FST I should I route it differently? Thank you!!!!

 

[WhiteSands]

1 - inflator hose
2 - drysuit inflator

 

[hongrace]

I believe the reg in your picture is an FSR not an FST.

 

[wunat]

I believe the reg in your picture is an FSR not an FST.

Yes, Mistaken.