Rich Keller
Contributor
The bench looks interesting. How is it connected to the hull? Didn't see a ladder so I am assuming it is off the stern on the port side? What type of ladder are you using?
Lobster.Saw.Us
- Thread starter paulthenurse
- Start date
Please register or login
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
- Ability to post and comment on topics and discussions.
- A Free photo gallery to share your dive photos with the world.
- You can make this box go away
Sounds good to me! I won't be around much in June, but would love to get out with you at some point.
OP
paulthenurse
Contributor
Dave, It's a Maycraft 2550 Pilot.
Rich, I made angle brackets from a bit of stainless plate, the brackets are drilled and through bolted then screwed into the uprights. Nothing fancy, made from 2x3's, it's going to get abused by tanks
The swing up T ladder is on the port side transom. It's got fairly high sides, a Jersey roll may be the best entry.
Rich, I made angle brackets from a bit of stainless plate, the brackets are drilled and through bolted then screwed into the uprights. Nothing fancy, made from 2x3's, it's going to get abused by tanks
The swing up T ladder is on the port side transom. It's got fairly high sides, a Jersey roll may be the best entry.
David Sutton
Contributor
Sure is a nice looking boat Paul !
Similar threads
