It's supposed to leak?!

Please register or login

Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.

Benefits of registering include

  • Ability to post and comment on topics and discussions.
  • A Free photo gallery to share your dive photos with the world.
  • You can make this box go away

Joining is quick and easy. Log in or Register now!

Ok, and a lot of Lemmings jump off a cliff at the same time too, does not mean its the correct thing to do.

I would talk to a local Parker distributer. They should be able to help you pick fittings that are made for what your using them for. Both in pressure range, flow rates, and service media. Also make sure all parts are stainless so you don't end up with a ball of rust hanging on a hose.

Are you looking for something for high pressure or low pressure?
 
Around here everyone uses Hanson quick-connects. I have never seen on leak.
 
hell no it not to leek!!! thats ur bail out. you will have a big problem if u contine to dive ****ty gear
 
Were they leaking from the fitting or from the crimping at the hose? If you have not found your hoses that don't leak we have them or will get you what you exactly what you want, no leaks. 440-439-3677 Buckeye Diving School.
 
https://www.shearwater.com/products/teric/

Back
Top Bottom