Recent content by CraigAClark

  1. CraigAClark

    Sailing Divers

    What power is available? What size generator do you have?
  2. CraigAClark

    Compressor oil for Nitrox

    Personally, with the number of hours on those machines, I'd be stripping them down and cleaning any carbon build up, including the cooling tubes. Bauer will make no recommendations for oil to be used for continuous blending or membrane produced nitrox. Chemlube 800 is used in the machines we...
  3. CraigAClark

    Compressor oil for Nitrox

    How old is the compressor, how many hours and what brand?
  4. CraigAClark

    Bypass or disconnect bauer securus system.

    I'm looking at the picture with the terminals where the red wires are connected. They are labeled 1,2,3 and 4. Is there a transformer in the main box? Do any of the red wires go to the overload relay on the starter? Does the compressor start and run for a short period before it shuts down? Will...
  5. CraigAClark

    Bypass or disconnect bauer securus system.

    I haven't forgotten about you, just need some free time. Probably Thursday or Friday.
  6. CraigAClark

    Bypass or disconnect bauer securus system.

    How old is this system, I have never seen one like it, without identifying the terminals in the Securus box. Doesn't mean we can't bypass it, it is just going to be a little more challenging than I originally thought. Do you have a meter that can measure voltage and continuity?
  7. CraigAClark

    Bypass or disconnect bauer securus system.

    Are any of the positions on the terminal strip in the Securus box marked, I.E. Com, N (Neutral), NO and NC?
  8. CraigAClark

    Bauer Utilus not building high pressure

    That final stage discharge valve is a 007780.
  9. CraigAClark

    Bauer Utilus not building high pressure

    How old is your Utilus. There was a time, probably in the '70's, where they used a 7780 discharge valve that screwed into the head. I have no idea if it is still available.
  10. CraigAClark

    Capitano help

    That would be located on the discharge side of the third stage, not on the first.
  11. CraigAClark

    Capitano help

    Nothng is missing. That threaded hole is used for the belt guard, depending on design. Your unit seems to be the "portable" (CG-DV) assembled in the US, Bauer, Norfolk. If it were a Euro unit, the hole would be used to support the guard.
  12. CraigAClark

    Bypass or disconnect bauer securus system.

    Can you take a picture of the Securus box with the cover off and one of the inside of the electrical control box? There are a couple ways to lock out the Securus and I need to see what would be easiest for you.
  13. CraigAClark

    which motor

    My living is earned as a Mako and Bauer tech. I also work on the side in the yachting industry for a company that sells/services Nitrox Solutions products. I have been giving advice on SB for a long time and some think it has been useful. Don't really care if the folks reading my posts are DIY...
  14. CraigAClark

    which motor

    That is great, if you are the end user and DIY. However, if you are supplying a client, liability always rears its ugly head. It is also possible that someone in the USA or Canada could acquire a used compressor with a 50Hz motor. I have provided many compressors to yachts that are 50Hz. If a...
Top Bottom