Question about GTR in Perdix AI

[KenGordon]

I set mine for a 3m (10 ft) last stop even though I will rarely go that shallow and the TTS will be wrong. Often my buddy has a computer that wants to do the stops between 3 and 6. If I am stuck below 6 this is a pain. Also sometimes 6 gets busy.

I'd like to have a setting where it assumed a last stop at 6 but allowed one at 3 it the ceiling was shallower without going red.

 

[NAM001]

Id have to look I thought it had a choice of no stop and last stop. So if yo enabled 10 ft yo stopped at 20 and 10. I don't remember where mine is set. I think i have mine set off for safety stop. We have so many < 50 ft lakes here. Either way all these settings effect eh tts data.

 

[Father]

Doesn't look like SW does multiple tank GTR. Kind of lame for people who sidemount but aren't doing a planned decompression dive.

Wonder if they just don't realize there could be a practical use for this?

 

[Mike1967]

Doesn't look like SW does multiple tank GTR. Kind of lame for people who sidemount but aren't doing a planned decompression dive.

I've asked for a SM mode a couple of times. Apparently it's too late to include it in the latest update and they can't give any idea of when it will be. It's a bit disappointing it wasn't on their to-do list given the amount of SM divers out there and the fact that other manufacturers think it's important enough.

 

[Ghost Diver #]

I've asked for a SM mode a couple of times. Apparently it's too late to include it in the latest update and they can't give any idea of when it will be. It's a bit disappointing it wasn't on their to-do list given the amount of SM divers out there and the fact that other manufacturers think it's important enough.

So with the perdix AI your able to continuously moinitor 2 cylinders PSI levels utilizing 2 transmitters (two tanks, side mount).. but not display or calulculate SAC and GTR with both? I know you can with one, I don’t side mount very often anymore...so I guess I didn’t realize that. How does it choose which transmitter to use to display that info? Must have missed that when reading the manual. Love both my perdix’s and wouldn’t trade them for anything but that seems kinda strange, unless I’m missing something?

 

[Mike1967]

So with the perdix AI your able to continuously moinitor 2 cylinders PSI levels utilizing 2 transmitters (two tanks, side mount).. but not display or calulculate SAC and GTR with both?

Correct.
Transmitter 1 is used for SAC and GTR by default which is useless, you basically have to double both to get a rou I used Dive Log to log my dives, it even has SM config. It'll work out SAC but you have to manually enter the start and finishing pressures of the TX 2 cylinder.

 

[AJ]

I used Dive Log to log my dives, it even has SM config. It'll work out SAC but you have to manually enter the start and finishing pressures of the TX 2 cylinder.

Does this mean the Teric does not trandfer pressure log from TX 2 to Divelog? That's odd.

 

[Mike1967]

Does this mean the Teric does not trandfer pressure log from TX 2 to Divelog? That's odd.

Pressure log yes but we're talking about GTR and SAC. In AI Setup the GTR Mode options are OFF, T1 or T2.

 

[Father]

This is kind of the point. It doesn’t combine the information coming from both transmitters?

There should be a 4th option for Sidemount.

 

[Mike1967]

Does this mean the Teric does not trandfer pressure log from TX 2 to Divelog?

Correction, Dive Log has a sidemount mode and does average litres per min calcs, the Perdix itself does SAC and GTR calculations from one TX or the other.