desat have a cool calculator a few years back even did tri mix , I still have it
Welcome to ScubaBoard, the world's largest scuba diving community. Registration is not required to read the forums, but we encourage you to join. Joining has its benefits and enables you to participate in the discussions.
Benefits of registering include
...
OK, for any reason you keep the ideal gas calculation. But please set real gas as factory setting, this is very helpfull.
.....
The factory setting for gas model has been changed to: "real gas (vdW)". Build "2020030801"
Thank you for feedback.
You should change the order of "adding gas" when blending trimix to add O2 first, then add helium to minimize the high pressure
I've found it very difficult to do this on my phone (not terribly large) between a tiny slider and then fine tuning by moving it bar at a time by typing. @Oleg G. Would it be possible to have the partial pressure blending tab include an option to mix with 02/nitrox. I believe that for some trimix mixes are very easy to mix with ean30 and no extra O2, so it could help for that as well.Start with an "unlimited" pressure in the supply tank of 40% (or the volume/pressure of your bank). Sent the pressure to what you want the final fill to be. Set the receiving tank to 21% and it's size, and slide the "existing pressure" until you get your final desired mix in the resulting tank. Subtract the pressures and you have your amounts...
Now do your fill in the opposite order....
The factory setting for gas model has been changed to: "real gas (vdW)". Build "2020030801"
Thank you for feedback.